Power Queen 12V 24V 30A MPPT Solar Charge Controller with

【12/24V MPPT with 99% Tracking Efficiency】Given Innovation MPPT technology's high tracking efficiency of up to 99% and peak conversion efficiency of 98%, the Power Queen MPPT Charge Controller can track arrays' maximum power point to get the most power to charge the battery and loads. It improves the energy utilization ratio by 15%-20% when compared to conventional PWM controllers.

【Intuitive LCD Display & Remote Monitoring】The Power Queen MPPT Controller includes an LCD screen and multiple LED indicators, and it’s intended to display information about system operation, customizable parameters, and error codes. It includes a Bluetooth adaptor with an RJ12 port and can be used with the integrated RS232 communication protocol to remotely monitor the real-time status of the solar panel, battery, and loads.  

【LiFePO4 Default Setting & Widely Use Range】The Power Queen 12/24V 30 Amp MPPT Charge Controller was conceived in response to the widespread demand from lithium battery users for a dedicated LiFePO4 battery controller. It's intended for LiFePO4 batteries, with a 12V LiFePO4 default setting, but it's also adaptable to Gel, Sealed, Flooded, and Lead-Acid batteries by manually setting.

【Solid Case Design & Built-in Multiple Protections】The utilization of a die-cast aluminum heat sink increases heat dissipation efficiency, which reduces power loss due to heat. And it can operate at full load in temperatures ranging from -31°F to 113°F. Over-voltage, over-power, short-circuit, reverse-connection, reverse-charging, and over-temperature protection are all built-in, ensuring total protection from the solar panels to the load terminal.  

【Complete Accessories Are Available in One Package】Power Queen MPPT Charge Controller provides the most comprehensive installing accessories for setting up a solar charge system. The accessories contain a copper wire connector* 6, heat shrink tubing* 6, mounting brackets * 4, and screws*8. The copper wire connector provides a larger contact area between the wire and the MPPT for increased overcurrent capability.  

Specification:
Model :   PQ2430    
Rated Charging Current :   30A
System Voltage:    12V(Default) / 24V / Auto    
Rated Load Current:    20A
Rated charging current:30A
Battery Voltage: 9V to 32V    
Operating Temperature:    -31°F to 113°F / -35°C to 45°C
Max. Power Point Voltage Range :   Battery Voltage +3V to 76V    
Conversion Efficiency:    ≤97%
Max. Solar Input Voltage :   100V(77°F / 25°C) / 90V(-13° F / -25°C)    
MPPT Tracking Efficiency :  99.9%
Max. Solar Panel System Input Power:    450W for 12V / 900W for 24V    
Communication Method:  RS485(RJ12)/Built-in BT
Temperature Compensation Factor:    -3mv/°F or °C / 2V (Default)    
Weight:    4.41lb / 2kg
Temperature Sensor:     Yes (Only for Lead-Acid battery)    
Dimensions：L245*W82.5*H180mm


Package Included:
Power Queen 30A MPPT Charge Controller*1
Remote Temperature Sensor (for Lead-Acid battery)*1  
Mounting Brackets*4  
Mounting Screws*12  
Copper Wire Connector*6
Heat Shrink Tubing for cable*6
Installation Guide*1
User Manual*1
Expansion Tube*4